REFURBISHED
Cisco
Cisco ASR1001-X-PWR-AC 341-0608-01 Refurbished AC Power Supply
MPN: ASR1001-X-PWR-AC
Request Bulk Quote
Lifetime
Warranty
ISO 9001
Certified Testing
R2v3
Responsible Refurb
25+
Years
5K+
Customers
ISO
Certified
✓
Tested
Every WhaleyComm unit is professionally tested, reset to factory defaults, and certified by our in-house engineers — the same standard trusted by 5,000+ organisations across 25 years. Not a refurb marketplace. A certified lifecycle partner.
Tested to factory specification. Backed by 25 years of enterprise trust.
This professionally tested, refurbished Cisco ASR1001-X-PWR-AC (spare part number 341-0608-01) is a 250W AC hot-swappable power supply purpose-built for the Cisco ASR 1001-X Router. It delivers 250W of output power at a DC voltage output of +12V, accepting a wide AC input range of +85 to +264 VAC at 47–63 Hz — making it well-suited for global deployment in varied power environments. Every unit is reset to factory defaults and shipped with a Certificate of Testing.The ASR1001-X-PWR-AC is designed for use in a 1+1 redundant, dual hot-pluggable configuration within the ASR 1001-X chassis. Current sharing on the 12V output rail ensures load balancing between installed supplies, while full hot-swap capability allows insertion or removal without powering down the router — a critical feature for high-availability enterprise and service provider environments. The IEC 60320 C14 AC inlet connector is rated at 10A, and the module includes an integrated handle for safe insertion and extraction.
Sourcing a refurbished Cisco ASR1001-X-PWR-AC through WhaleyComm delivers the same Cisco-engineered reliability at a fraction of new pricing — keeping your ASR 1001-X platform running with redundant power protection without a capital-intensive procurement cycle. WhaleyComm has served 5,000+ enterprise customers over 25+ years with ISO 9001-certified testing, R2v3, and e-Stewards certified processes you can trust.
Technical Specifications
Part Number (MPN)
ASR1001-X-PWR-AC
Spare / Assembly Part Number
341-0608-01
Compatible Platform
Cisco ASR 1001-X Router
Power Output
250W
DC Voltage Output
+12V
AC Input Voltage Range
+85 to +264 VAC
AC Input Frequency
47–63 Hz
AC Inlet Connector
IEC 60320 C14, 10A rated
Form Factor
Hot-plug / redundant plug-in module
Redundancy Configuration
1+1 dual hot-pluggable (current sharing on 12V output)
Hot-Swap Support
Yes — insertion/removal without powering down router
Power Supply Slots
PS0 (left) and PS1 (right) at rear of chassis
Condition
Refurbished — professionally tested, reset to factory defaults
Ideal Use Cases
Redundant Power Replacement for ASR 1001-X
Restore or establish 1+1 redundant power in an existing ASR 1001-X chassis, ensuring continuous operation if a primary supply fails.
Spare Inventory for Enterprise WAN Edge
Organizations running ASR 1001-X routers at WAN edge or branch aggregation sites can maintain a tested spare to minimize mean time to recovery during unexpected power supply failures.
Data Center and Colocation High-Availability Deployments
Hot-swap capability and dual-feed support make this power supply ideal for data center environments requiring zero-downtime maintenance windows and uninterrupted power continuity.
Service Provider and Managed Services Infrastructure
Service providers managing large ASR 1001-X fleets can reduce operational cost by stocking refurbished spares that meet the same electrical and safety standards as new units.
Cost-Conscious Network Refresh or Upgrade
Enterprises refreshing aging power infrastructure can replace degraded power supplies at a significantly lower cost than new Cisco list price without sacrificing reliability or compatibility.
What's Included
Cisco ASR1001-X-PWR-AC (341-0608-01) AC Power Supply
AC power cord (IEC 60320 C14)
Certificate of testing and factory reset
WhaleyComm Lifetime Warranty certificate
Lifetime Warranty — No Time Limits. No Questions.
Every WhaleyComm unit ships with a Lifetime Warranty. If it fails under normal operating conditions at any point, we replace it. We have stood behind our hardware for 25 years and 5,000+ customers — that is not a marketing line, it is our operating standard.
Compatibility Details
Review supported optics, cables, software, management protocols, and environment-specific compatibility guidance.
Compatible Chassis
✓
Cisco ASR 1001-X Router (ASR1001-X)
Power Supply Slots
✓
PS0 — left slot (rear of chassis)
✓
PS1 — right slot (rear of chassis)
AC Inlet Cable
✓
IEC 60320 C14 power cord (included)
Not Compatible With
✓
Cisco ASR 1001 (non-X variant — uses different PSU)
✓
Cisco ASR 1002-X, ASR 1004, ASR 1006 (different chassis form factors)
For compatibility verification specific to your environment, contact our engineering team: +1 214 607-4800 or sales@whaleycomm.com
Shipping & Returns
Clear fulfilment, tracking, return, warranty, and support information for enterprise hardware orders.
Shipping
Orders typically ship within 1-2 business days after payment confirmation. Tracking details are shared once the order has been dispatched.
Returns
Eligible products can be returned according to WhaleyComm's return policy. For DOA, warranty, or product-related issues, contact the support team for replacement or resolution.
Frequently Asked Questions
Product-specific answers about compatibility, testing, warranty, fulfilment, and purchase confidence.
The ASR1001-X-PWR-AC is specifically designed for the Cisco ASR 1001-X Router. It is not cross-compatible with other ASR 1000 Series models such as the ASR 1001 (non-X) or ASR 1002-X. Always verify chassis compatibility before installation.
The ASR 1001-X supports a 1+1 redundant configuration with two power supply slots (PS0 and PS1) at the rear of the chassis. Both supplies current-share on the 12V output rail, and either can be hot-swapped without powering down the router, ensuring continuous network availability during maintenance.
Yes. The ASR1001-X-PWR-AC accepts a wide AC input range of +85 to +264 VAC at 47–63 Hz, making it compatible with both North American (120V/60Hz) and international (230V/50Hz) power environments without any manual switching.
Yes. Every WhaleyComm unit ships with a Lifetime Warranty. If it fails under normal operating conditions at any point, we replace it at no cost — no time limits, no questions asked.
Every unit goes through our ISO 9001-certified testing process: full power-on diagnostics, port-by-port functionality testing, firmware verification, factory reset, and final inspection. A Certificate of Testing ships with every unit.
Cisco ASR1001-X-PWR-AC 341-0608-01 Refurbished AC Power Supply
$58.00
Cisco
Cisco ASR1001-X-PWR-AC 341-0608-01 Refurbished AC Power Supply
MPN: ASR1001-X-PWR-AC
$58.00
In Stock — Ships Same Day
