FAQ Platform Guide
Common questions
What is the Cisco Catalyst 9300 series used for?
The Catalyst 9300 is a family of stackable enterprise access switches. Models differ in port count, PoE capability and uplink options, which the part number shows. Typical use is campus and branch access layers, including PoE for access points and phones.
What is the Cisco Catalyst 3850 series?
The Catalyst 3850 is a stackable Cisco access switch family that many campus networks still run. Models vary by port count and PoE type. Check Cisco's end-of-life notices for the model before you plan a long deployment.
What is the difference between the Catalyst 9200 and 9300?
Both are enterprise access switches in Cisco's Catalyst 9000 family. The 9200 is the entry-level line with fewer stacking and uplink options, and the 9300 is the higher-capacity stackable line. Compare the exact models' stacking bandwidth, uplinks and PoE budget on their datasheets.
What are Cisco Nexus 9000 and Nexus 3000 switches used for?
Nexus switches are Cisco's data center line. The Nexus 9300 series (N9K-C93...) is commonly used as leaf and spine switches in data center fabrics, and the Nexus 3000 series (N3K-...) in low-latency 10G and 40G top-of-rack roles.
What are the Cisco ASR 1000 and ISR 4000 series?
The ASR 1000 series are Cisco aggregation services routers for large branches, WAN edge and service-provider roles. The ISR 4000 series are integrated services routers for branch offices. The ASR1001-X and ISR4331 are examples in our catalog.
What is the Arista 7050X series?
The Arista 7050X family is a line of data center switches built for leaf and top-of-rack use. Variants such as the 7050SX, 7050TX, 7050QX and 7050CX differ mainly in port types and speeds: SFP+ fiber, 10GBASE-T copper, QSFP+ 40G, or 25G and 100G ports. Confirm the exact port mix on the product page.
What is the Arista 7280R series?
The 7280R is Arista's family of high-density routing switches with deep buffers, used for data center spine, edge and routing roles. Models such as the 7280QR, 7280CR, 7280TR and 7280SR differ in port types and speeds.
What is Arista EOS?
EOS is the network operating system on Arista switches. It is built on Linux and supports automation tools and programmable interfaces, which is why data center teams use it for scripted configuration and monitoring.
What is Junos OS?
Junos OS is Juniper's network operating system. It runs on Juniper switches, routers and firewalls and uses one configuration style across platforms, so teams that manage several Juniper product lines work with a single command set.
What are the Juniper QFX5100 and QFX5200 switches?
The QFX5100 is a Juniper data center switch line with 10G and 40G ports, often used as a top-of-rack leaf. The QFX5200 moves to higher speeds, and the QFX5200-32C in our catalog has 32 ports of 100GbE QSFP28, commonly used as a spine switch. Both run Junos OS.
What is the Juniper MX204?
The Juniper MX204 is a compact router in the MX series, used for network edge, peering and aggregation roles. It runs Junos OS.
What is the Aruba 3810M switch family?
The Aruba 3810M is a stackable enterprise switch family from HPE Aruba. It supports Aruba's Virtual Switching Framework, which combines several 3810M switches into one logical stack with unified management and added redundancy.
What is the difference between the Cisco C9130AXE and C9130AXI access points?
Both are Cisco Wi-Fi 6 (802.11ax) access points. The C9130AXE has external antenna connectors, and antennas are sold separately. The C9130AXI has internal antennas. Both are normally powered over PoE.
What does 3PCC mean on a Cisco IP phone?
3PCC stands for third-party call control. A 3PCC phone runs SIP firmware so it works with third-party phone systems, while the standard version is built for Cisco's own call control platforms.