Home Cisco Cisco AIR-CAP1532I-B-K9 Refurbished 802.11n Outdoor Access Point
Cisco

Cisco AIR-CAP1532I-B-K9 Refurbished 802.11n Outdoor Access Point

MPN: AIR-CAP1532I-B-K9
$55.00
In Stock — Ships Same Day
Request Bulk Quote
Questions before purchasing?
+1 214 607-4800
Mon–Fri 8am–6pm CST · Enterprise sales team
🛡️
Lifetime
Warranty
📋
ISO 9001
Certified Testing
♻️
R2v3
Responsible Refurb
25+
Years
5K+
Customers
ISO
Certified
Tested

Every WhaleyComm unit is professionally tested, reset to factory defaults, and certified by our in-house engineers — the same standard trusted by 5,000+ organisations across 25 years. Not a refurb marketplace. A certified lifecycle partner.

Tested to factory specification. Backed by 25 years of enterprise trust.

This professionally tested and refurbished Cisco AIR-CAP1532I-B-K9 is a carrier-grade, dual-radio 802.11n outdoor access point from the Cisco Aironet 1530 Series. Designed for rugged outdoor deployments, it delivers reliable wireless connectivity in a compact, low-profile enclosure measuring just 9 × 7 × 4 inches (23 × 17 × 10 cm) and weighing 5.0 lb (2.3 kg). Built to IP67 ingress protection standards, this unit withstands sustained winds up to 100 mph and temperature extremes from -30°C to +65°C — making it an ideal choice for street poles, building facades, stadiums, and any urban outdoor environment. Every unit ships fully reset to factory defaults with a Certificate of Testing.

The AIR-CAP1532I-B-K9 features a dual-radio architecture supporting IEEE 802.11b/g/n on 2.4 GHz and 802.11a/n on 5 GHz. The 2.4 GHz radio operates in 3×3 MIMO with 3 spatial streams, while the 5 GHz radio delivers 2×3 MIMO with 2 spatial streams — both providing PHY data rates up to 300 Mbps. The integrated dual-band antenna radome delivers 3 dBi gain at 2.4 GHz and 5 dBi gain at 5 GHz. Interfaces include a WAN port (10/100/1000BASE-T, RJ-45), a LAN port (10/100/1000BASE-T, RJ-45), a management console port, and a DC power input. The unit supports PoE (UPoE for full 3×3 MIMO operation) or PoE+ / 802.3at, and can operate as a controller-based or autonomous access point, mesh node, bridge, workgroup bridge, or serial backhaul endpoint. Key software features include Cisco BandSelect, VideoStream for high-quality video over Wi-Fi, and dynamic frequency selection (DFS).

At $68, this refurbished Cisco AIR-CAP1532I-B-K9 delivers enterprise-grade outdoor wireless performance at a fraction of the cost of new — making it an exceptional value for municipalities, hospitality campuses, logistics yards, and enterprise outdoor coverage expansions. WhaleyComm has served 5,000+ enterprise customers for 25+ years, and every unit is backed by our Lifetime Warranty.
Technical Specifications
Part Number
AIR-CAP1532I-B-K9
Wireless Standard
IEEE 802.11b/g/n (2.4 GHz), IEEE 802.11a/n (5 GHz)
2.4 GHz Radio
3×3 MIMO, 3 spatial streams (3T3R)
5 GHz Radio
2×3 MIMO, 2 spatial streams (2T3R)
Maximum PHY Data Rate
Up to 300 Mbps
Channel Support
20 MHz (2.4 and 5 GHz); 40 MHz (5 GHz only)
Antenna Type
Integrated dual-band omnidirectional radome (internal)
Antenna Gain
3 dBi (2.4 GHz), 5 dBi (5 GHz)
WAN Interface
10/100/1000BASE-T Ethernet, autosensing (RJ-45)
LAN Interface
10/100/1000BASE-T Ethernet, autosensing (RJ-45)
Management Port
Console port (RJ-45) with Reset button
Power Options
PoE (UPoE for full 3×3; PoE+ / 802.3at for 2×3 mode); DC power input
Supported Power Injectors
AIR-PWRINJ1500-2=, AIR-PWRINJ-30=
Dimensions (L × W × H)
9 × 7 × 4 in. (23 × 17 × 10 cm)
Weight
5.0 lb (2.3 kg)
Enclosure Rating
IEC 60529 IP67
Operating Temperature
-30° to +65°C (-22° to 149°F) ambient; -30° to +55°C with solar loading
Storage Temperature
-50° to +85°C (-58° to 185°F)
Operating Altitude
Up to 10,000 ft (3,048 m)
Humidity
0–100%, condensing
Wind Resistance
Up to 100 mph sustained; up to 140 mph gusts
Environmental Certifications
MIL-STD-810F (icing, corrosion), EN 60068-2-5 (solar radiation), ANSI_C136.31-200 (vibration)
Regulatory Compliance
FCC Part 15, IEC 60950, UL 60950, EN 300.328, EN 301.893, ICES-003, RSS-210
Deployment Modes
Controller-based AP, autonomous AP, mesh node, point-to-point bridge, point-to-multipoint bridge, workgroup bridge, serial backhaul
Key Software Features
Cisco BandSelect, VideoStream, DFS, A-MPDU packet aggregation, MAC address filtering, VPN passthrough
Regulatory Domain
B (United States / Canada)
Ideal Use Cases
Urban Outdoor Wi-Fi Deployments
The IP67-rated, low-profile form factor allows this unit to mount unobtrusively on street light poles, utility poles, and building facades, delivering carrier-grade Wi-Fi to pedestrians and small cells in dense urban environments.
Enterprise Campus Outdoor Coverage Extension
Seamlessly extend indoor wireless networks to parking lots, courtyards, loading docks, and outdoor common areas, operating in controller-based mode alongside existing Cisco Wireless LAN Controllers for unified management.
Outdoor Mesh Networking
Deploy as a mesh node using the 5 GHz radio for wireless backhaul between nodes, enabling cost-effective coverage expansion in areas where running ethernet cable is impractical or cost-prohibitive.
Point-to-Point and Point-to-Multipoint Bridging
Ideal for connecting remote buildings, warehouses, or campus structures with high-capacity wireless data links without requiring fiber or copper runs between locations.
Logistics, Warehousing, and Industrial Yards
The MIL-STD-810F-rated enclosure and wide operating temperature range make this AP suitable for ruggedized industrial deployments where equipment faces vibration, corrosion, and extreme heat or cold.
Hospitality and Event Venue Outdoor Coverage
Deliver reliable guest Wi-Fi to outdoor dining areas, pool decks, sports stadiums, and fairgrounds, with VideoStream ensuring high-quality video performance even under high client density.
What's Included
Cisco AIR-CAP1532I-B-K9 802.11n Outdoor Access Point
Mounting bracket (wall/pole mount — AIR-ACC1530-PMK1 compatible)
Certificate of testing and factory reset
WhaleyComm Lifetime Warranty certificate
Lifetime Warranty — No Time Limits. No Questions.
Every WhaleyComm unit ships with a Lifetime Warranty. If it fails under normal operating conditions at any point, we replace it. We have stood behind our hardware for 25 years and 5,000+ customers — that is not a marketing line, it is our operating standard.
🔌
Compatibility Details
Review supported optics, cables, software, management protocols, and environment-specific compatibility guidance.
Wireless LAN Controllers
Cisco 3504 Wireless Controller
Cisco 5508 Wireless Controller
Cisco 5520 Wireless Controller
Cisco 8510 Wireless Controller
Cisco Virtual Wireless Controller (vWLC)
Supported Power Injectors
AIR-PWRINJ1500-2= (100–240 VAC, indoor use only)
AIR-PWRINJ-30= (100–240 VAC, indoor use only)
Optional Accessories
AIR-ACC1530-PMK1= — Wall/Pole mount bracket
AIR-ACC1530-PMK2= — Wall/Pole mount bracket with tilt mechanism
AIR-ACC1530-CVR= — Solar shield / cover
AIR-PWRADPT-1530= — AC/DC power adapter
AIR-ACC1530-KIT1= — Spare parts kit (cable glands, power connector, ground lug)
Ethernet Cabling
Shielded outdoor-rated CAT5e or better (required for IP67 compliance)
For compatibility verification specific to your environment, contact our engineering team: +1 214 607-4800 or sales@whaleycomm.com
📦
Shipping & Returns
Clear fulfilment, tracking, return, warranty, and support information for enterprise hardware orders.
📦
Shipping
Orders typically ship within 1-2 business days after payment confirmation. Tracking details are shared once the order has been dispatched.
Returns
Eligible products can be returned according to WhaleyComm's return policy. For DOA, warranty, or product-related issues, contact the support team for replacement or resolution.
?
Frequently Asked Questions
Product-specific answers about compatibility, testing, warranty, fulfilment, and purchase confidence.
The AIR-CAP1532I-B-K9 supports IEEE 802.11b/g/n on 2.4 GHz and 802.11a/n on 5 GHz. The 2.4 GHz radio delivers 3×3 MIMO with 3 spatial streams, and the 5 GHz radio supports 2×3 MIMO with 2 spatial streams, both achieving PHY data rates up to 300 Mbps.
The unit supports Power over Ethernet and DC power input. For full 3×3 MIMO operation on the 2.4 GHz radio, UPoE or the AIR-PWRINJ1500-2= power injector is required. If powered via PoE+ (802.3at) using the AIR-PWRINJ-30=, the access point automatically drops to 2×3 MIMO mode on the 2.4 GHz radio.
The Cisco Aironet 1530 Series supports both controller-based and autonomous standalone operation. It can also be deployed as a mesh node, point-to-point bridge, point-to-multipoint bridge, workgroup bridge, or serial backhaul endpoint, providing significant deployment flexibility.
Yes. Every WhaleyComm unit ships with a Lifetime Warranty. If it fails under normal operating conditions at any point, we replace it at no cost — no time limits, no questions asked.
Every unit goes through our ISO 9001-certified testing process: full power-on diagnostics, port-by-port functionality testing, firmware verification, factory reset, and final inspection. A Certificate of Testing ships with every unit.
Cisco AIR-CAP1532I-B-K9 Refurbished 802.11n Outdoor Access Point
$55.00
Call Now